[smartly] bug report and support thread

Sorry I missed this. Weather is getting too dang nice, so I neglected my PC time.

There is no styling for the “Date” attribute, but that’s a great reason to make some!

What would you like to see done to the “Date” attribute tile? It looks like the month/day/year are separate, so we should me able to adjust thing fairly easily. Let me know your thoughts and I’ll see what can be done.

3 Likes

HI TechMeax.
I did not expect a super quick response from developers, I thought maybe someone could just point me in the right direction.
It’s been over a year since I used smartly and decided to revamp my dashboards (that a testimony to how good the product is)
This is a sketch of the early mockup I have created.

As you can see I have a date/time attribute under the clock which is cropped. Ideally I would like a date attribute that could have the colour changes and what parts can be displayed. I.e day, month

The default has this wacky way of displaying it which is not ideal.

Anyway also would love to hear more input.

Edit: I don’t suppose there is anyway to get rid of the second hand from the clock is there. I have a feeling I know the answer but thought I would check :slight_smile:

1 Like

So that’s the Date-Clock attribute (not “Date”) which does have a few mods. Unfortunately I don’t think much more can be done with it. However, while appreciate the consideration, I’m not a dev, and I’ll have to tag @spelcheck for confirmation. That tile seems to be pulling system time, and there doesn’t seem to be any separation of anything, meaning we cannot manipulate anything.

Just spit balling here, but we might have better luck using a “custom app” to pull the data from a time server and configure it to have a better output attribute. Not being a dev I don’t know how to do that, or if it is possible.

I’m using the date/time and time tile in this design. However would like to see the date tile customisable as you suggested whilst using the time tile additionally.

You have had your fair share of input into this for a while, okay you may not be coding, but you are one of the core developers - I’m sure @spelcheck thinks that too :slight_smile:

1 Like

@spelcheck just noticed something that I think is a bug.

When you select these.


and you save.

every time you go back in you have to tick the box again as it doesn’t save.

1 Like

Thanks for reporting this @BorrisTheCat. I just tested and I see what you mean. The check boxes on the smartly editor are un-checked when going back. However the setting does seem to stick, meaning the color changes are still applied, even if you do NOT recheck the boxes.

Can you please confirm this is what you are seeing as well, and I’ll get a bug report going.

I wanted to circle back with you on this. While admittedly I’ve been spending too much time Egg Hunting I did spend some time messing with this. The one thing I’m hung up on is how to get all the div’s combined. I might need some expert help from @spelcheck on this one. His mojo is much more powerful than mine.

Here are the class you can traget and some of the ‘hacking’ I’ve done thus far.

#tile-2 .month.p-1 {
 background : #fff !important;
 color: #b11;
 font-size: 100%;
 text-align : left;
 padding-left : 25px;
}

#tile-2 .weekday.p-1 {
display:none !important;
}

#tile-2 .day.p-1 {
 color: #b11;
 font-size: 75%;
 text-align : center;
 padding-left : 0px;
}

#tile-2 .year.p-1 {
 color: #000 ;
 font-size: 100%;
 text-align : right;
 padding-left : 0px;
}

I think the div’s need to be combined via HTML changes, but that’s above my pay grade.

I did start a github request for it, since we have no mods, and we should.

1 Like

A search did not find an answer to this.
I need to move the smartly-inject tile on my dashboard, but am not sure how to select the tile as it is always hidden.
It is overtop of a menu tile and the smartly-inject tile is not hidden on my older iPad.

You’ll need to manually remove it from your JSON (Layout tab) and then add it back where you want it.

To do so, look for this entry on the layout tab (recommend c/p into Notepad and then search for “javascript” to locate it)

    {
      "rowSpan": 2,
      "template": "attribute",
      "col": 3,
      "colSpan": 2,
      "id": 1,
      "row": 1,
      "device": "1256",
      "templateExtra": "javascript"
    },

Make sure to remove the “{” all the way to the closing “},”

Once removed c/p the remaining data back into the layout tab and save. Then add smartly inject back as you normally would.

Each
“device”: “417”
should only be in the file once correct?

Unless you have a device on the dash more than once. I think I have some multi sensors on more than once like temp and humidity as separate tiles.

If that device (417) is your smartly injector, yes you only want one of those.

I should have used this in my example.
“templateExtra”: “javascript”
And I am assuming since you told me to search for “javascript” then it is the smartly injector tile.

I will remove the (2) extra’s. :wink:
Should there be a error message when someone attempts to insert more than one smartly injector tile?

1 Like

Technically it’s not an error, just not needed. It won’t create “problems”, but it’s unnecessary. Not sure we need extra dev just to tell people not to. It’s your hub/dashboard put as many as you like :wink:

Hi folks;

Trying hard here to use the temp/humidity gradient feature but not being able:

  • if I mark the checkbox of “global value-based temperature tile color.” or the humidity, when I click save those options are un-checked
  • if I try to use directly on the tile, where I put in there “0,5,10,15,20,25,30,35” since I am in a tropical country and with Celcius scale I get the options saved but on the tiles I only see purple regardeless the temperature.

Am I doing something wrong?

this is a known issue, but the settings work, the boxes just don’t stay checked.

Do you have the smartly inject device installed on your hub and placed on that dashboard?

1 Like

I don’t. Is it needed? Also for humidity?

So the settings we mark, even not maintaining marked, is still valid?

What are the ranges used on that one?

Yes, any “dynamic” changes are done by the smartly injector. Once added, you’ll see the tiles are purple when the dash is 1st loaded then the color fills in once smartly inject works it’s magic. Without it they will not function.

Correct

Roughly based off my OG charts.

C

F

EDIT oh wait you mean humidity? Not sure if I have a chart for that, let me check.]

No sorry doesn’t look like I made a humidity color chart. I should. If you want you can add a dozen or so virtual sensors and set them all to 10 percent increments (or less) then put them all on a dash with smartly injector and post the results.

1 Like

Indeed. As you said, like magic.
Thanks for the support.

1 Like

So, I have had the tile for smartly on a few dashboards on everything working correct. I went through just now and created new dashboards manually for the rooms in my house and added the tile for smartly, also manually. None of these new dashboards are showing the paw print. The previous instances of smartly are functioning as expected. Nothing happening in the logs besides this,

“Now: 1621840085425, JS length: 1015, Maximum is 1024,”

Be sure you haven’t mistakenly chosen the ‘javascriptLength’ option.

If the tile remains on the screen with 1015 showing, the wrong option is set. Change it to ‘javascript’ If that’s not it LMK and we’ll dig deeper (I did just create a fresh dash to test. It seems to be working as expected)

and Welcome to OLL!

3 Likes