[smartly] bug report and support thread

[lgkahn]

@spelcheck

@TechMedX has the screenshots of the scales in PMs from when we finished them back when I was on HE forums. Maybe he can retrieve them? I think we should (re)create a thread for color-changing tiles so we can all talk more about them. Now more than ever we can customize gradients, thresholds, etc on the fly and I’m sure we’ll come up with all kinds of cool stuff.

#1 on the to-do list is a ‘freezer’ and ‘fridge’ gradient option, so it’s green up to a threshold then red afterwards. @markus already built the values, we just need to implement.

my current templates are here

lgkahn/hubitat/blob/master/tilecolor.txt

i assume we still cannot do too many increments due to the size of the text? or has that been resolved

this gives you an idea kinda what they look like but not in a hubitat stock dashboard but in my version of smarttiles as hubitat does not have a good way to truncate the decimal off short of installing a million virtual devices…

[adam]

It seems like the force to lowercase is back on hp3.

[spelcheck]

Hotpatch 4 - 10/30/2020

• ADVANCED to BASIC grid converter (use “911”) @BorrisTheCat
  – create a way to revert a BASIC to ADVANCED grid conversion · Issue #102 · ezeek/smartly · GitHub
• “Cannot set property ‘value’ of undefined” found and diagnosed by @BlueMoon23
  – GREAT work on this, Blue.
  – smartly_update and smartly_settings_update modals not properly disposed of on close · Issue #104 · ezeek/smartly · GitHub

Hotpatch 3 - 10/29/2020

• Attempt at fixing “Cannot set property ‘value’ of undefined”

Hotpatch 2 - 10/28/2020

• “Lowercase text transformed” @wecoyote5
  – overzealous text-transform: lowercase should NOT affect input elements · Issue #103 · ezeek/smartly · GitHub

Hotpatch 1 - 10/25/2020

• “when using the new 60/22 standard grid, calibration is 2x zoom” @jasonbalsor
  – when using the new 60/22 standard grid, calibration is 2x zoom · Issue #101 · ezeek/smartly · GitHub

[adam]

Working fine in hp4.

[adam]

If I try to have only the icon show on a dashboard link, it shows the icon and the original name of the dashboard.

Example: Dashboard name is “Home1”. If I select an icon and choose “hide the text, only show the icon.”, it will show the icon and the original dashboard name to the right of it.

[spelcheck]

@lgkahn

i assume we still cannot do too many increments due to the size of the text? or has that been resolved

this gives you an idea kinda what they look like but not in a hubitat stock dashboard but in my version of smarttiles as hubitat does not have a good way to truncate the decimal off short of installing a million virtual devices…

So now that we are using SMARTLY-INJECT we no longer use colorTemplates:[], also decimals are automatically converted to whole numbers.

At this point it’s safe to remove those temperature/humidity value color templates.

[spelcheck]

@adam

If I try to have only the icon show on a dashboard link, it shows the icon and the original name of the dashboard.

Example: Dashboard name is “Home1”. If I select an icon and choose “hide the text, only show the icon.”, it will show the icon and the original dashboard name to the right of it.

Apologies, the instructions are unclear. All “modifiers” show up in a fieldset, the darkened box with a title. When its a multi-option modifier, it normally starts with a checkbox. That checkbox enables or disables the modifier. In this case it’s Buttonize.

The second checkbox ‘icon only’ is for the Buttonize mod and only works when it’s enabled.

[lgkahn]

@spelcheck

So now that we are using SMARTLY-INJECT we no longer use colorTemplates:[], also decimals are automatically converted to whole numbers.

At this point it’s safe to remove those temperature/humidity value color templates.

ok but if i want to customize to my own color template what do i need to do… and i assume i need to run it back through smartly… is the pxx version also supported still?

[spelcheck]

|split into [smartly] custom temperature gradient HOWTO

@lgkahn

ok but if i want to customize to my own color template what do i need to do… and i assume i need to run it back through smartly… is the pxx version also supported still?

Under the color tab when editing the tile in SMARTLY, you’ll see some help text below the input box. Currently we are only supporting a single gradient color-scheme, but in the future we’ll allow creating our own.

So, the gradient is purple > blue > green > yellow > orange > red. The default values are in the help text, so if you want your “comfortable” temperature to be 20 degrees lower (moving the green area of the gradient down 20 degrees) for F, you’d use:

-30, 15, 32, 33, 50, 70, 100, 120

purple, blue, blue_end, green_start, green, yellow, orange, red

 

@lgkahn

is the pxx version also supported still?

It will be once I get around to rolling the new version.

[adam]

Thank you. I will do that.

[adam]

Worked like a charm! Thanks again.

[epw]

@epw

@spelcheck

Definitely drop back in here and keep us in the loop.

Will do

I gave up on waiting and installed manually. Another forum member reported having difficulty updating with HPM (Smartly Inject driver already installed), and the error looked similar. However, not everyone seems to have this problem… HPM is working fine for some folks. I’m too impatient to wait, so I installed the hard way. Drag and drop is awesome!!!

[wecoyote5]

Thanks! I’ll set it up that way, I should’ve figured it would be something simple.

[spelcheck]

@adam it’s just for fun, to have a badge showing that you’re a smartly project supporter

[adam]

Sure! I’m in.

[wegericp]

Hi again,

With Cromium on Raspberry Pi the injector tile doesn’t work either, but does using a different browser.

[spelcheck]

@wegericp

With Cromium on Raspberry Pi the injector tile doesn’t work either, but does using a different browser.

Created a ticket to track this, will tag you when we get it working. Thank you again for your help with the troubleshooting!

[adam]

When using the icon for the dashboard link instead of the text, I have to enter a custom label or the icon seems to be 2-3 times bigger than normal.

Without Label:

With Label:

[spelcheck]

Are you using a single space character as the title in that second screenshot? It isn’t a bad thing to have the icon nudged to the left a little bit, and it will look centered between the left edge and the three dots.

I usually want to create more mods to make adjustments like this, but the mods will get pretty confusing if I add another ‘remove label’. Let me know about the blank/space title. I’m hoping that can work!

[adam]

I will try with the blank space tomorrow. It works fine if I put a custom title in there. It just makes it big if I remove the label and don’t put a custom title in there, even if I mark it not to show.